Project AE86 aka the never ending project by marley4us

2 minute(s) of a 225 minute read

got a new rear bumper!!! Excited to install it and send my baby off to paint!

11-5-2013

Bumper installed!!!! I am going to space it a little to match the widebody! but ya it was easy!

Tools:

19 mm socket

10 mm socket

Phillips Screwdriver

Flathead Screwdriver

Remove the (4) 19mm bolts in the trunk (pb blaster or wd40 them to help ease the bolts off)

then there are (2) 10mm bolts behind the plastic trim in the trunk quarter panels.

Then there is (2) 10mm bolts for the side piece where the mud guards are

and finally (1) 10mm bolt holding the bumper to the quarter panels trim

Uglier then sin USDM rear bumper!!!

yes almost there!!!

Ohhh giggity!!!!

and my JDM replica Jblood style bumper!