Phoenix Estate Vvc K-Series Diy Subframe Conversion

By diyauto
( 3 )

2 minute(s) of a 66 minute read

6-8-2015


I was after a small Nippon Denso alternator and some people have found them in Daihatsu Charades and such like. I took a chance on this one cod it was £12. But it's only a little bit smaller. Fail. I'll post up all the info I have so other people don't make the same mistake.

SUZUKI ALTO 2005 ( 03-06 ) 1.1 16v ALTERNATOR
TAKEN FROM A NON AIRCON MODEL
DENSO MAKE
PART NUMBER 31400-79G00 / SR102211-5610

63431C9D-4E21-421E-A20E-2C0D8BCA05F1_zps


Before my welder started buggering about, I got the gearbox mount done.


A6F00F0C-FE95-430F-8792-7220B4CCD811_zps

I cut off the extra support and covered the notches in the lower leg


1DB4D492-9CCC-42AE-B5FF-E0B7F8B82877_zps


I cut the o/s driveshaft hole bigger and then welded the seam for strength.


23F51208-BB0E-487E-B249-7843F2E61A35_zps

Ditto for the n/s driveshaft clearance.


E4FF0ABD-1BD6-4A32-89DB-4D2BFDF1F75E_zps



Comments

Are you keeping it orange?

Posted by Diggymart on 3/13/19 @ 9:57:04 PM