Phoenix Estate Vvc K-Series Diy Subframe Conversion

2 minute(s) of a 66 minute read

Fits in the engine bay, with only minor trimming of inner wings.

Needs tidying, but notch in near side is done to clear sump (hopefully!)

12-21-2013

A couple of little jobs boxed off. I made the notch look pretty, although it appears impossible to take a good picture of.

I finished off the removeable arm for gearbox mount. I added another bit to stop any forward/backward motion.

Then I cut out parts of the subframe towers to get the driveshafts in and out. It looks horribly weak though, so I'll be adding some steel here. These will bolt into tabs I will weld onto frame.