You must be logged in to rate content!
3 minute(s) of a 99 minute read
12-31-2006
MORE PICS...
here is that new resistor i put in... and its not going to get near as hot...as its double the wattage (2 ohm 50W) vs 2 ohm 25W in the kit they give you
the passneger side switch
took pcm out to put in alarm
rear of car
rear of car2
rear of car3, where it goes over the axle
Spliced MAF connection
Spliced MAF connection done
The funky resistor... and my resistor box with more 2ohm 50W resistors... lol
she should be running by lunchtime sunday...at this time in about 10hrs....lol
goodnight @1:30am, startin @8am tomorrow and hopin to crank around lunchtime or a little after
...hehehehehehhehehehehe I started painting them
all will be black cept for the one LONG pipe as from the side to normal people (no one up here) it would like like the exhaust from first glance. also we gotta paint the pipe that goes to the TB... but thats after it gets running!!!!!!
AND ITS ALIVE!!!!! haven't driven it yet but going to soon. gotta mount the boost gauge in and put all the panels back in but other than that its done. 
no leaks and no problems... knock on WOOOOOOOD.
we did everything our way and according to the instructions. lets just hope we don't melt a hose/wire and what not.
still gotta flash the new tune in her before i drive it...but its a GO!!