Brandon's 2012 ISM STI Build GR Sedan by evans609

4 minute(s) of a 172 minute read

Little update again lol talking to myself I think hahaha anyways I got the new 3P Management system and its beautiful.

So here it is. Hoping to get a chance to switch over the system during this week or perhaps next weekend.

So first as per usual the instructions.



the system came in an awesome box lol ill prob keep it haha



Opening of the box



Amazing quality controller



and the manifold which again is amazing lol

so the plan is to face the manifold with the air line connections facing the tank so all the lines car run under the tank for a cleaner look.

An issue I ran into was the connections in the relay kept coming off so we rewired it too a female plug and just hooks right up to the replay.

Some other little things I have planned is to mount a sub and amp and prob suede the trunk liner

5-16-2016

Got a tiny little update from yesterday.

So unboxed everything and had a read down through the instructions. Seems preety straight forward.

So here is it all unboxed.



Car up on jack stands.



Rerouted the lines back to the trunk for the manifold.



Had to rerun the fron line due to them being too short from the switches but that was simple.



We think we pinpointed the noise in the rear so we took care of that and in the front driver it seemed that the lines where hitting up against the fender causing the knock. So rerouted that and tie wrapped the others back so hopefully that handles that.

5-17-2016

Another little update; 

Got the manifold mounted and the lines ran to the manifold as well as the electrical for the manifold. 

Lines ran back behind the tank 

Connection from the back

All tidied up 

This is the relay we did for a better connection.

Mounted the relay up behind the tank

and made sure it all started and no leaks lol