Hi comp with ITBs on AEM EMS 4 by ethergore2

By diyauto
( 3 )

1 minute(s) of a 30 minute read

1-28-2013

Old ugly filter setup:



My fancy YSPL headers from K1:



Beautiful welds:



Good clearance but they still just barely rattle against the side of the bay when the idle is low:



I used this part from Bonaco to get an -AN fitting on the end of my fuel lines. IMO there is no need to run steel braided hose all the way from the tank:



Also fitted a pressure gauge with a female threaded banjo bolt:




Comments