Building the 7A-FE, Lots of pics!!!!!!! by Smaay

By diyauto
( 3 )

4 minute(s) of a 19 minute read

3-2-2010

Damaged bearings









Amazingly the crank was fine, look at the bearing!!!!!




New piston installed, the old one had some damage on it. Something bad happened in this engine



Head all cleaned up


Removing the keepers and retainers, I use a socket and smack it with a dead blow hammer. 


Look at these exhaust valves, nastyness!



After a good cleaning on the wire wheel



These are the valve guide seals, most of them fell apart like this when removed. another reason for burnign oil and smoking


Intake valve, look at the awesomeness collected on there, think flow imporved after a good cleaning?


These are the marks on the crank to identify what main bearing to install



This is the new oil pump gasket




Oil pump installed


#1 oil pan after a good sand blasing



These numbers on the bottom of the block also identify what piston to install




Comments

Great build!

Posted by Diggymart on 11/4/19 @ 12:20:12 PM