TA 0291110 Buildup by slimfromnz

By diyauto
( 3 )

2 minute(s) of a 44 minute read

4-5-2013

Hi all,

More progress.

I have made brackets for the vacuum pump and alternator. The only concern I have is the belt contact on the alternator. I can run a second belt from the crank pulley to the alternator pulley if it becomes an issue.


Here is the CAD(cardboard aided design) template I started with. The alloy round bar is for the spacers. And I used 6mm alloy flat bar.


Sort of jumped the gun with photos. Here is the finished product. The adjuster is a sbc one I bought and cut all the crap off it.




This spacer connects to the adjuster. I made it an interference fit which seems to have worked great.





I also have the -12 welded to the rocker cover and a breather welded into the other for the vacuum pump. I will take some pics and post.

We are looking at Dyno time in the next week or two. They havent finished installing the dyno yet.

Cheers





Comments

Nice pics!

Posted by Diggymart on 5/12/20 @ 2:53:28 PM