Engine compartment "Refresh" by CougaDan70

By diyauto
( 2 )

3 minute(s) of a 23 minute read

1-23-2014

Grill & Eyelids before:

GrillEyelidPass.jpg
EyelidDriv.jpg

Became this:
EyelidclosRef.jpg

Little further view:
GrillsEyelidsRef1.jpg
GrillsEyelidsRef2.jpg

I am pretty pleased with them, my wife feels my patience has incraesed thousands times!


2-3-2014

Headbeams were repainted... could not remove all the corrosion, especially in the back, but they still look much better

SuppLumPt.jpg
SuppLumVersoPt.jpg
SuppLumRestPt.jpg

WITH BEAMS IN SUPPORTS:

PharesRestPt.jpg
PharesRestVersoPt.jpg


I am happy with that.


I cleaned up the windshield washer reserveoir to a satisfatory level but a bed of dirt remains in the pump housing, under the pump. This will not be visible when the unit will be put back in place, but it bugs me. I can not figure how to remove the pump without damaging the seal, shop manual says the reservoir and the pump can not be seperated and must be serviced as one unit... well well anyone who would have done it sucessfully would be welcome to share the trick.


2-7-2014

Still on my way, now with front turn signals:

FtTSBx.jpg
FtTSBz.jpg
FtTSRestSM.jpg


I am now facing plenty of rusted & stripped bolts and I broke a few (even while using a penetratig solvent to free them up) with the actual result that I can not remove the front bumper nor the reinforcing bars attahcing bottom of front fenders to the frame. I am not comfortable using a torch to heat them up.




Comments