You must be logged in to rate content!
2 minute(s) of a 308 minute read
4-26-2010
Weekends go way to fast...
Well its aready Sunday and rain is on the way for this afternoon. With alot of bare metal exposed from saturdays work i have to make sure to get it expoxy primed and have enough dry time to get the car covered up before the weather turns to crap. I prepared the inside of my outer rocker, all of the bare metal, door hinges and a few other areas on the car for paint. I welded up a few small areas in the cowl and inner rocker and ground them. Since the L/s floor will be next i needed to remove the brake pedal, gas pedal and the wiring harness.![[âIMG]](/uploads/users/3/2017/10/268210e7b5015a733915_1-1507572196.jpg)
![[âIMG]](/uploads/users/3/2017/10/268210e7b5015a733915_3-1507572198.jpg)
Not wanting to chance it i mixed the epoxy primer and wiped down all panels to recieve paint while waiting for the 30 minute induction time for the paint. Then started painting.
![[âIMG]](/uploads/users/3/2017/10/3e1a2ce18e81261c868b_4-1507572199.jpg)
While the paint was drying i had a few other parts already stripped and in prime and painted those.![[âIMG]](/uploads/users/3/2017/10/7b8a60b941886b82235b_1-1507572200.jpg)
![[âIMG]](/uploads/users/3/2017/10/7b8a60b941886b82235b_2-1507572200.jpg)
with the car being to wet to work on i grabbed a cold beverage and sat down to do a little planning..... Thanks for stopping by Rob ![[âIMG]](/uploads/users/3/2017/10/5aba270e98d045b07b2a-1507572200.jpg)
![[âIMG]](/uploads/users/3/2017/10/268210e7b5015a733915_2-1507572197.jpg)
![[âIMG]](/uploads/users/3/2017/10/3e1a2ce18e81261c868b_1-1507572198.jpg)
![[âIMG]](/uploads/users/3/2017/10/3e1a2ce18e81261c868b_2-1507572198.jpg)
![[âIMG]](/uploads/users/3/2017/10/3e1a2ce18e81261c868b_3-1507572199.jpg)
Great cars so cool back then. I believe about $3,600 at the time?
Posted by Diggymart on 1/29/21 @ 2:25:36 PM