You must be logged in to rate content!
2 minute(s) of a 84 minute read
2-10-2020
Got the 2nd shift rail seal done. This one was a pain to get out. The shift rail was opened over on a couple of the detents which made it difficult coming out. Got everything filed down and cleaned up and re assembled.
Still have to clean and paint the seal cover for it. That's tommorows job.
2-16-2020
Not much work on the jeep. Took some loads of scraps in and got some extra cash. Got a roof rack and a new set winter tires for my crv from work, both for free too.
2-21-2020
Been taking more loads of scrap in. Was quoted just under a 1000 for the 2 converters I have hanging in the garage. So when I'm ready to take them in il have some good money from that for the jeep. Might be picking up some cars/SUVs just to scrap as well so I should have some more progress coming up soon on the jeep.
3-29-2020
So with all the Corona going around I'm holding off on spending any money on the jeep. That being said I have my wife's Camaro on Jack stands, moved the wheels to the shed, I'm replacing all the brake lines. Carb is off and rebuild kit orderd. It's a Rochester quadrajet. I think it's a 800cfm. I'm gonna convert it to electric choke. Last time I had the car running I blew a line backing it into the garage. Alot of the brakes and suspension were replaced before it went into storage so it wont take much to get it in the road.
It's a small single car garage. I have to much equipment and parts. The car has sat here for the last 3-4 years probably. My wife and son are looking forward to driving it.