2003 Wrangler Sport, 4.5" RE Lift, 33" BFG KM2's and a never ending wish list by jeepinjeffrey

3 minute(s) of a 77 minute read

I finally got around to swapping my stock rear control arms for some currie control arms to make it all 8, I have the adjustable lower with the double adjustable uppers. Let me just say the double adjustable's are AMAZING so worth the extra money you can dial in your pinion angle by hand no problem!

Half way done! Lowers in just uppers to go.

the upper holes were to small for the greasable bolt so I called currie and they said to drill them out a bit for a better fit, so I did on one side I could reach and just used the stock bolt for the one my the exhaust I couldn't drill out.

There all in and done! i just have a little bit of groaning ive got to figure out, but the set is now complete!

Pinion Angle is much happier now

I got my JKS quicker Disconnects in finally! They are much stronger and will go a lot farther then my rough country ones did.

Let me just say they used to be straight

Here is the new editions!

and I really like the storage pins to keep them up my home made ones for my rough country disconnects snapped when my tire rubbed them so these should go a lot farther keeping them stored up.

If you've been following by built you probably noticed I REALLY dont like the color red or orange or hence the LED tail lights , and clear marker light, so of course I had debadged my Disconnects from the red JKS Stickers