2JZ SC300 Rebuild by drifterx27

By diyauto
( 2 )

2 minute(s) of a 136 minute read

5-18-2013

Update:


Got the turbo intake housing welded with the fitting I needed. Then went home and started making the lines. Couple hours later, the lines are made and installed. I then filled the car with Toyota Red coolant, distilled water, and a bottle of Redline Water Wetter. I also filled the power steering reservoir up. I ordered a new coolant reservoir since the one I have is yellow looking. 


So now I am just waiting on the master from Cam Tuning to let me know when he is ready for me. I also have to get 12 gallons of 91 and flush the remaining gas out of the tank using 6 gallons and then fill it after with the other 6. 


Also thinking of ordering new rear tires because I am pretty sure I will be spinning on the dyno and everywhere else. I will stick with the Nitto NT05R for the Supra wheels, and get the Mickey Thompson ET Street II for the CCW's. 




5-19-2013


Update:


Talked to Discount Tire. I will be ordering some new rear tires with them. Nitto NT05R 275/40/17. The same as I have now. I have to order it Monday since the Nitto warehouse isn't open on the weekend.




5-22-2013


Went to Scarpas for a dessert to celebrate.


Gonna lower the front a little tomorrow. And the video, I think I will just upload it raw. So just click through it.




Update:


Video uploaded. It's unedited, so just click through. Idle was misfiring at first, and got it adjusted towards the end of the video.





Comments