Antilag_200 attempts a Wire Tucking Project: PRESHOOTOUT BUILD by antilag_200

By diyauto
( 5 )

2 minute(s) of a 128 minute read

1-29-2013

Worked on this thing for another 7 odd hours today, ( It is starting to wear on me thats for sure). At the end of the day you can pick all the nuts out of the ****, but it is still poop after all the work.


So started up with wiring in the defi gauges and wideband. Once that was completed. I made a gauge sensor harness that ran to the engine compartment. Shrouded with heat shrink tubing to tidy things up



Was expecting a smoke show when I attached the battery , but everything seemed to work ..( have a few burnt out bulbs in the cluster though)The defi gauges turned out well



a shot of the interior





Next I cut all the unused posts on the firewall, as I am tired of those things nicking me everytime I wrench on the car. Masked everything off and shot it with some satin black.





firewall turned out alright



had a chance to mount up my fuel press regulator.. Next is to build the fuel lines



and finally a shot of the bay



Enjoy.



Comments

Amazing job!

Posted by bdub on 1/21/21 @ 1:49:22 PM

Amazing !

Posted by Diggymart on 1/3/20 @ 8:02:34 PM

Wow! Exceptional work!

Posted by diyauto on 4/24/17 @ 10:29:44 PM