You must be logged in to rate content!
5 minute(s) of a 115 minute read
2-19-2010
Before:
After: Powder coated
More parts to show up on Monday.
3/20/2010
While the 9" is being built, I am fitting the subframe connectors. Having some fittment issues and had to cut them apart and making some minor changes.
Note the bent tube. I have plenty of room. Before: passenger side
After: drivers side. No issues rmoving the exhaust.
3/21/2010
Finished fitting the subframe connectors today. They are ready for paint and need to be welded on next.
These connectors need to be modified so they would fit correctly. Here are some pictures of what was involved.
Passenger side had to be cut apart.
Finished
3/25/2010
Subframe connectors are fitted, welded in and painted.
The 9" has been ordered, may see next week.
Transmission and tune are the only things left.
3/27/2010
Getting the CME mounted. Going to have to go to the local muffler shop with a mandrel bender to get the center outlet to fit correctly.
4/1/2010
Getting closer, mounted up the tires. Waiting on the for the 9" rearend to arrive.
Front:
Rear:
4/18/2010
The fabricated 9" came in on friday, have been test fitting and getting things ready before powder coating.
Out with the old:
In with the new:
Fabbing up my own torque arm crossmember and will get the tubing bent to my specs on monday.
