2003 Wrangler Sport, 4.5" RE Lift, 33" BFG KM2's and a never ending wish list by jeepinjeffrey

2 minute(s) of a 77 minute read

For my birthday I got a set of front Quadratec Ultimate Floor Liners but I wasnt a fan of the big quadratec logo in gold and green because it didnt go well with my jeep and looked weird. If I would have bought them my self I probably would have ordered the tread lightly logo but because it was a gift I made a few changes to personalize them to look how I wanted.

Here is how they look from quadratec. 

http://www.quadratec.com/showcases/q...roductpage.jpg

If you turn the mats over you can slide the silver rivets off the back side of the logo plate and it will come right out. 

Then you can use a razorblade or knife to peel back a bit of the sticker from the black plastic holder and its comes right off.

Here is the two separate

sticky side

print side

I measured the size of the plastic plate and used my vinyl plotter to plot out the Jeep logo in silver to match all of my other decals on my Jeep and stuck it on. then I just slid the plate back in the mat and pushed the rivets back on.

Here is how it look all done! Im very happy with them!